2014
2014
Volume 7, Number 4, 2014 April
-
- Sample Entropy Analysis of Heart Rate Variability during Rest and Exercise in Hypoxia, Liu Yuanyuan, Liu Chengyu, Wang Binhua and Yu Mengsun (pp. 1-8).
- New Stability Analysis for Systems with Interval Time-varying Delay via a Delay-fractioning Approach, Yuzhi Liu and Muguo Li (pp. 9-18).
- Investigation into Engineering Ceramics Grinding Mechanism and the Influential Factors of the Grinding Force, DongKun Zhang, Changhe Li, Dongzhou Jia and Yanbin Zhang (pp. 19-34).
- Adaptive Time-to-Trigger Scheme for Optimizing LTE Handover, Juwon Kim, Geunhyung Lee and Hoh Peter In (pp. 35-44).
- Study on Parameters Optimization Method of Fuzzy Neural Network PID Controller, Chunguang Zhang and Lifang Zhang (pp. 45-54).
- The Application of Ideal Efficiency Analysis Mode on Contactless Excitation Energy Transmission System, Jinfeng Liu, Xudong Wang and Meicun Yan (pp. 55-64).
- Impact of Voltage Reduction on Voltage Stability in Emergency Conditions, Seon-Ju Ahn, Dong-Hyun Yoo and Joon-Ho Choi (pp. 65-72).
- Analysis and Experimental Validation of a Space-Vector-Modulation Algorithm for Four-Leg Active Power Filter, Zhenfeng Xiao, Yilong Chen, Rongxiang Yuan and Xiangtian Deng (pp. 73-88).
- Selecting between Pick-and-sort System and Carousel System Based on Order Clustering and Genetic Algorithm, Wang Yanyan, Mou Shandong and Shen Changpeng (pp. 89-102).
- Estimation and Compensation of Non-deterministic Delays for Time Synchronization in Wireless Sensor Networks, Shiu Kumar, Yeonwoo Lee and Seong Ro Lee (pp. 103-112).
- A Practical Scheme for Induction Motor Modelling and Speed Control, Xinxin Shi, Hongsheng Li and Jiacai Huang (pp. 113-124).
- An Alternative Approach to Multiple Models: Application to Control of a Production Cell, Sabah Al-Fedaghi (pp. 125-136).
- QoS Preference Awareness Task Scheduling Based on PSO and AHP Methods, Juan Wang, Fei Li and Luqiao Zhang (pp. 137-152).
- Design of Wire-Crossing Technique Based on Difference of Cell State in Quantum-Dot Cellular Automata, Sang-Ho Shin, Jun-Cheol Jeon and Kee-Young Yoo (pp. 153-164).
- Determining System Design Space Relative to its Architecture and Preventive Maintenance Policy, Shawulu Hunira Nggada (pp. 165-174).
- A Set of Stabilizing PID Controllers for Multi input-Multi output Systems, Leena G. and G. Ray (pp. 175-190).
- Electricity Load Forecast Emulation Research Based on the Multi-model Merit, Qingxin Zhang, Zhanbo Cui, Luping Wang and Yanki Zhou (pp. 191-204).
- The Fuel Economy Analysis of Series Hybrid Electric Bus with Different Energy Storage Devices, Xiaogang Wu, Chen Hu, Jiuyu Du and Meilan Zhou (pp. 205-216).
- Microcontroller ATmega8535 Based Solar Tracker Design for PV System Applications in Equator Region, Syafaruddin, Ranu Fauzan, Andika S. Amir and Hajime Miyauchi (pp. 217-234).
- Optimized Design for Electric Vehicle Quick Charging System in Consideration of Economic Feasibility, Young-Choon Kim and Moon-Taek Cho (pp. 235-246).
- Transfer Function Approximation Via Rationalized Haar Transform in Frequency Domain, Joon-Hoon Park (pp. 247-258).
- Research on Fuzzy Self-tuning PID Control to Servo System of Airborne Radar, Hongmei Li (pp. 259-266).
- High Power Full-Bridge DC-DC Converter using a Center-Tapped Transformer and a Full-Wave Type Rectifier, Min-Gi Kim, Geun-Yong Park, Doo-Hee Yoo and Gang-Youl Jeong (pp. 267-278).
- An Adaptive Resource Allocation Scheme for Improving VoIP Capacity in Mobile WiMAX Systems, Soonuk Seol and Sungsoo Cho (pp. 279-284).
- Reduction in Encoding Redundancy over Visual Sensor Networks, Hyungkeuk Lee, Hyunwoo Lee, Won Ryu and Kyounghee Lee (pp. 285-294).
- An Improvement Detection Technology of APF based on the Digital Sliding Filter, Man Chuntao, Zhang Bo, Zhang Caiyun and Yu Shanyu (pp. 295-304).
- Development of a Remote Embedded System Controlled by a Mobile Device, Sungil Yoo, Hyeok Oh, Eun-Ji Kim and Dongik Oh (pp. 305-312).
- Robust Controller Design for the Cooperative Control of Lower Extremity Rehabilitation Robot, Zhizheng Wu, Feng Li, Wenjun Mi and Jingtao Lei (pp. 313-328).
- Influence Research of Cavity Shapes on Temperature Field of Multi-pad Hydrostatic Thrust Bearing, Xiaodong Yu, Qihui Zhou, Xiuli Meng, Huanhuan Li, Dan Liu, Xu Fu, Bo Wu, Li Tan, Bai Qin and Xuezhe Dong (pp. 329-336).
- Study on the Technology of Digital Recognition in Verification Process of Mechanical and Electronic Anemometer, Jianying Fan, An Wang, Yang Gao and Lei Yu (pp. 337-244).
- P-S Time Observation based on Laser Interferometer Seismic Signal Data, Minwoo Lim, Kyunghyun Lee, Jungkeun Oh and Kwanho You (pp. 345-354).
- Application of Improved Neural Network in the Automotive Engine Fault Diagnosis, Di Lu and Jing Liu (pp. 355-362).
- Multi-physics Field Analysis of Nuclear Power Valve based on MDO Model, Dai Ye, Jiang Jin-gang and Cheng Tian-yu (pp. 363-372).
- Optimum Bistatic Angle Extraction Using Compressed Time-Frequency Feature Vectors, Sung-Jun Lee, Seung-Jae Lee, In-Sik Choi and Dae-Young Chae (pp. 373-384).
- Design and Application of a NEW Seven-Dimensional Hyperchaotic System, Duanzeng Liu, Jianliang Zhu and Hao Sun (pp. 385-394).
- A Clonal Selection Algorithm for Classification of Mangroves Remote Sensing Image, Yan-Min Luo and Ming-Hong Liao (pp. 395-404).
- An Improved Optimal Path and Energy Efficiency Routing Algorithm in Cyber-Physical Systems for Real-Time Basketball Player Monitoring, Shiliang Luo, Lianglun Cheng and Bin Ren (pp. 405-416).
- Comparison of Neural Network and Fuzzy Logic Control for Nonlinear Model of Two Link Rigid Manipulator, Narinder Singh and Bharti Panjwani (pp. 417-428).
- Study on Stable Estimation Method for Lead-acid Battery SOC by Extended Kalman Filter, Changhao Piao, Mingliang Liu, Ling Su, Zuncheng Li, Chongdu Cho and Sheng Lu (pp. 429-438).